Diagnosing Issues That Might Need Electrical Repairs in Oakdale, CA

January 20, 2017 2:42 am Published by Leave your thoughts

It is important to make sure that the electrical system in your home is well maintained so that you and your family have the access you need at all times. Over time, though, key components of this system can experience degradation that leads to malfunctions. Here are a few electrical issues that you may encounter that might need electrical repairs in Oakdale, CA:

  • Light bulbs: If you have noticed that your light bulbs have continually been burning out too quickly, it could be a symptom of a deeper connection issue. It is expected that outdoor light bulbs or other lights that are commonly left on for extended periods of time on a daily basis will burn out quicker than the estimated expectancy. But if you have been replacing bulbs that experience normal usage with greater frequency, there could be connectivity issues between the neutral wire and the electrical box. The problem could also be localized in a specific socket that has gone bad due to age, in which case you will likely need to call an electrician for an entire light fixture replacement.
  • Flickering lights: A small flicker that occurs when an idle, energy-saving appliance turns on or throttles down is normal. However, if you flip the switch in a room and the light flickers or dims every time you do so, you could be looking at something more serious. First check to make sure that the light bulb isn’t defective, or about to blow out from age. Once you have eliminated any issues that may exist with the actual light bulb, check to see if the flickering is happening throughout the entire house, or with one particular light or outlet. If it is happening in just one area, there is probably a poor connection somewhere along that specific circuit. If it is happening in many different areas in your home, the issue is most likely affecting the main wire connection. In either case, you should have an electrician come out to take a look at it to diagnose where the issue is occurring.
  • Dead outlets: Over time, outlets may lose their potency as the connections begin to loosen from repeated usage. Some outlets have ground fault circuit interrupters (GFCI), whose purpose is to shut off the power if an outlet becomes unsafe and a shock hazard is present. If you have tried to reset these types of outlets and you have also attempted to reset the main circuit breaker to no avail, it is possible that this particular outlet is experiencing overload from too many appliances using power on that circuit. Having an electrician install another outlet and rerouting some of the wiring is one way to distribute the power demands more evenly, which can help you avoid the reoccurrence of this issue in the future.

If you are experiencing any of these issues, contact the knowledgeable team at Wilkinson Electric Inc. With experience in installations and all sorts of electrical repairs in Oakdale, CA, we are the right ones to call to make sure you and your family aren’t left in the dark. Give us a call today to learn more about our electrical services.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *